Anschlüsse und Anzeigen
CX22B / CX22B-W
A3169-8.0
HBM: public
23
und legen Sie
CX22B‒W Digitaleingang 3 - START/
STOP‐Taster
als Triggerkanal fest.
Falls Sie sowohl Start als auch Stopp des Messjobs über
den Taster steuern, wird beim ersten Drücken der Mess
job gestartet und beim nächsten Drücken gestoppt.
Wichtig
Die Taste START/STOP ist parallel zum Eingang an
Klemme 3 geschaltet. Falls Sie den Taster verwenden
möchten, sollten Sie deshalb den Eingang 3 nicht
beschalten. Andernfalls wird der Zustand „Aktiv“ (LOW)
sowohl von einem Tastendruck als auch von einem
LOW‐Signal an Klemme 3 ausgelöst.
4.10 LED‐Anzeigen
1
2
3
4
5
6
7
8
10
9
Abb. 4.4
Lage der LEDs