CX22B‒W für autarke Messungen konfigurieren
70
A3169-8.0
HBM: public
CX22B / CX22B-W
(
Verhalten bei Initialisierungsfehlern vor der
Messung
).
►
Verlassen Sie den Dialog mit Klick auf
OK
.
►
Beenden Sie catman
EASY.
►
Klicken Sie im Startbildschirm auf
Einstellungen
.
►
Aktivieren Sie auf dem Register
Allgemein
die Option
DAQ‐Software (catmanEASY) nach dem Starten
des CX22B‒W starten
und klicken Sie auf
OK
.
►
Klicken Sie auf
Änderungen sichern und neu
starten
, um die neuen Einstellungen dauerhaft zu
sichern.
Beim nächsten Einschalten des CX22B‒W wird dieses
Projekt automatisch gestartet. Falls während der
Messung die Stromversorgung unterbrochen wird, wird
nach der Wiederherstellung der Stromversorgung auch
das Projekt wieder geladen und die Messung wird fortge
setzt. Der Neustart des Moduls bis zur Fortsetzung der
Messung benötigt ca. 3 Minuten, abhängig von der An
zahl der angeschlossenen Geräte und Kanäle.
Wichtig
Die bereits im temporären Messdatenspeicher von cat
man
[
EASY vorhandenen Daten gehen bei einer Un
terbrechung der Stromversorgung
nicht verloren. Zusätz
liche Dateien werden mit einem Zähler am Ende des
Dateinamens versehen.