Anschlüsse und Anzeigen
18
A3169-8.0
HBM: public
CX22B / CX22B-W
4.1
Spannungsversorgung
Schließen Sie eine Versorgungsspannung von
DC 10 - 30 V an den Anschluss X104 an (
siehe
). Verwenden Sie eine Spannungsversorgung,
die genügend Leistung liefert, falls an den CX22B‒W
angeschlossene QuantumX‐Module oder direkt an das
Gerät angeschlossene Geräte wie GPS‐Sensoren,
Kameras oder Datenspeicher ebenfalls versorgt werden
sollen.
Die Gleichspannungsversorgung muss eine SELV-
Spannungsversorgung sein, die den Anforderungen von
IEC / EN / DIN EN 609501 entspricht. Die Versorgungs
spannung muss durch eine adäquate DC‐Sicherung (z.B.
LITTELFUSE KLKD 6, LFPHV001) mit einem maximalen
Strom von 5 A abgesichert werden.
Hinweis
Bei im Fahrzeug verbauten Modulen empfehlen wir den
Anschluss an eine separate Batterie oder die Integration
einer Unterbrechungsfreien Stromversorgung (USV), da
vor allem beim Start eines Verbrennungsmotors die
Batteriespannung unter 10 V fallen kann und damit die
Module automatisch einen Neustart ausführen.
Für den Labor‐ oder allgemein stationären Betrieb bietet
HBM das Netzteil NTX001 an. Es bietet auf der Primär
seite eine Auswahl internationaler Steckertypen und auf
der Sekundärseite 24 V und 30 Watt. Darüber können ein
CX22B‒W und ein weiteres Modul gespeist werden
.
Die
genauen Leistungsangaben der Module finden Sie in den
jeweiligen Datenblättern.