Hawking HW9ACM, User Manual

Page: 99 / 179

92
Band (2): Select the band you want to use, the two HW9ACM’s must use
the same setting. Refer to 3-6-1-1 for definitions.
Channel Number (3): Select the channel you want to use, the two wireless
HW9ACMs must use the same setting.
MAC Address (4): Input the MAC address of another HW9ACM
Security Settings (5): Click to setting security for this connection
(Please go to section ‘3-6-3 Wireless Security’
for detailed instructions). All units on the WDS network must
use the same security settings.
NOTE: Two HW9ACM
’s must use the same mode, band, channel
number, and security setting!