Hawking HW9ACM, User Manual

Page: 125 / 179

118
Bandwidth (2): bandwidth in kbits. To disable download bandwidth limitation,
input ‘0’ here.
Total Upload You can set the limit of total upload
Bandwidth (3): bandwidth in kbits. To disable upload bandwidth limitation,
input ‘0’ here.
Current QoS All existing QoS rules will be displayed here.
Table (4):
Add (5):
Click ‘add’ button to add a new QoS rule, see section 3-7-2 ‘Add
a new QoS rule’ below.
Edit (6): If you want to modify the content of a specific rule, please check
the ‘select’ box of the rule you want to edit, then click ‘Edit’
button. Only one rule should be selected a time! If you didn’t
select a rule before clicking ‘Edit’ button, you’ll be prompted to
add a new rule.
Delete (7): You can delete selected rules by clicking this
button. You can select one or more rules to delete by check the
‘select’ the box of the rule(s) you want to delete a time.
If the
QoS table is empty, this button will be grayed out and can not
be clicked.
Delete All (8): By clicking this button, you can delete all rules currently in the
QoS table. If the QoS table is empty, this button will be grayed
out and can not be clicked.
Move Up (9): You can pull up the priority of the QoS rule you selected by
clicking this button.
Move Down (10): You can lower the priority of the QoS rule you selected by
clicking this button.
If you want to reset all settings in this page back to previously-saved value, please click