Propeller Owner's Manual
136
INSTALLATION AND REMOVAL
61-00-36
Page 3-9
Rev. 2 Feb/17
Installation Torques
CAUTION 1: MOUNTING HARDWARE MUST BE CLEAN AND
DRY TO PREVENT TOO MUCH PRELOAD OF
THE MOUNTING FLANGE.
CAUTION 2: ALL TORQUES LISTED ARE DRY TORQUE.
CAUTION 3: REFER TO FIGURE 3-1 FOR TORQUE READING
WHEN USING A TORQUE WRENCH ADAPTER.
Hub clamping bolts/spinner mtg. nuts
20-22 ft-lbs (28-29 N•m)
R flange propeller mtg. studs
60-70 ft-lbs (82-95 N•m)
Governor Max. RPM Stop locking nut 30-36 in-lbs (3.4-4.0 N•m)
Governor Attachment Self-locking
Nuts B-3808-5
18-20 ft-lbs (25-27 N•m)
Torque Table
Table 3-1
