Propeller Owner's Manual
136
INSTALLATION AND REMOVAL
61-00-36
Page 3-8
Rev. 2 Feb/17
(actual torque required) X (torque wrench length)
Torque wrench reading
(torque wrench length) + (length of adapter)
=
to achieve required actual
torque
Determining Torque Value When Using Torquing Adapter
Figure 3-1
APS0212A
0.25 foot
(76.2 mm)
1.00 foot
(304.8 mm)
Standard Torque Wrench
Torquing Adapter
100 Ft-Lb (136 N•m) x 1.00 ft (304.8 mm)
1.00 ft (304.8 mm) + 0.25 ft (76.2 mm)
reading on torque
wrench with 3-inch
(76.2 mm) adapter for
actual torque of 100
Ft-Lb (136 N•m)
EXAMPLE:
=
<
80 Ft-Lb
(108 N•m)
The correction shown is for an adapter that is aligned with the centerline of the
torque wrench. If the adapter is angled 90 degrees relative to the torque wrench
centerline, the torque wrench reading and actual torque applied will be equal.