Harman Martin ERA 150 Wash, User Manual

Page: 7 / 52

Martin ® ERA 150 Wash User Guide 7
and materials. Allow the fixture to cool for at least 15 minutes
before handling.
Keep flammable materials well away from the fixture. Keep all
combustible materials (e.g. fabric, wood, paper) at least 0.5 m
(1.7 ft.) away from the fixture housing.
Ensure that there is free and unobstructed airflow around the
fixture. Provide a minimum clearance of 0.5 m (1.7 ft.) around
fans and air vents.
Do not use the fixture to illuminate surfaces within 1 m (3.3 ft.)
of the fixture.
Do not stick filters, masks or other materials onto any optical
component.
The fixture’s lenses can focus the sun’s rays inside the fixture,
creating a risk of fire and damage. Do not expose the front of
the fixture to sunlight or any other bright light source. After
powering the fixture off, check that the head is pointing away
from any potential source of powerful light.
Protection from eye injury
Warning! Risk Group 2 product according to EN 62471 and
IEC/TR 62778.
The ERA 150 Wash fixture falls into the following risk groups
according to EN 62471 and IEC/TR 62778 at the distances
indicated below.
The luminaire should be positioned so that prolonged staring
into the luminaire at a distance closer than 21.5 m is not
expected.
Do not look directly into the product’s light output.
Do not look at operating lamp. Eye injury may result.
Do not look at the light output with magnifiers, telescopes,
binoculars or similar optical instruments that may concentrate
the light output.