Harman Martin ERA 150 Wash, User Manual

Page: 20 / 52

20 Martin ® ERA 150 Wash User Guide
To adjust the tilt inversion settings:
1. Select TILT INVERSE and press ENTER to confirm. The currently set
mode will blink in the display.
2. Use the DOWN and UP buttons to select YES (tilt inversion) or NO
(normal) mode.
3. Press ENTER to save your selection.
Pan/tilt speed
The PAN / TILT SPEED command lets you choose between two settings:
•
FAST optimizes pan and tilt movement for speed. Slow pan and tilt
movement may be less smooth.
•
SMOOTH optimizes pan and tilt movement for smoothness. Slow pan
and tilt movement will be smoother than at the FAST setting, but
maximum pan and tilt movement speed will be reduced.
Raw, extended and calibrated modes
In raw mode, all LEDs operate at full intensity and CTC (color temperature
correction) functionality is disabled. The color output of one fixture may or
may not closely match that of other fixtures, depending on LED binning.
In extended mode, mixed white is calibrated, giving perfect white matching
across multiple fixtures, but primary and secondary colors are not calibrated,
which allows maximum color saturation. The closer you move towards white,
the more closely multiple fixtures will match each other’s output. The further
you move away from white and the closer you move towards saturated
color, the less closely multiple fixtures will match each other’s output.
In calibrated mode, white and color are fully calibrated. This means that the
output of multiple fixtures will match with no visible differences. On the other
hand, color saturation will be slightly less heavy.
Tungsten emulation mode
In tungsten emulation mode, the fixture’s white light output is made warmer,
the warm shift is increased at lower dimming levels, and an ‘afterglow‘ effect
is add ed after dimming. This mode gives the ‘look and feel’ of a fixture that
uses a 2800 K incandescent light bulb as its source.