Harman Martin ERA 150 Wash, User Manual

Page: 25 / 52

Martin ® ERA 150 Wash User Guide 25
2. Use the DOWN and UP buttons to increase or decrease the current
fixture ID number until you reach the ID number that you want to allocate
to the fixture.
3. Press ENTER to confirm the new ID number (or press MENU to exit
without making a change).
RDM unique ID number
You can view the fixture’s unique non -resettable 12-digit RDM ID number.
To view the RDM UID number:
1. Select INFORMATION
→ RDM UID and press ENTER. The display will
indicate the fixture’s unique RDM ID number.
2. Press MENU to exit.
Fixture temperature readouts
To check the onboard temperature of the fixture:
1. Select INFORMATION
→ TEMPERATURES and press ENTER. The
fixture will display on two lines the current temperatures of the LED PCB
and of the PSU PCB.
2. To return to the previous level of the menu structure, press MENU.
Fan speed readouts
To view the current speed of each of the fixture’s cooling fans in RPM:
1. Select INFORMATION → FAN SPEED and press ENTER. The fixture
will display on two lines the current speeds in RPM of the LED PCB
cooling fan and of the PSU PCB cooling fan.
2. To return to the previous level of the menu structure, press MENU.
DMX Live
You can view the DMX values currently being received on each of the
fixture’s DMX channels . This can be useful for troubleshooting purposes.
To view the DMX values being received:
1. Select DMX LIVE and use the UP and DOWN buttons to scroll through
the value being received on each channel.
2. To return to the previous level of the menu structure, press MENU.
Resetting the fixture
You can reset the entire fixture to return it to its state when you powered it
on, or you can reset its effects only.
•
To carry out a full reset, select MANUAL CONTROL → RESET → ALL,
select YES or NO and press ENTER. The entire fixture will reset as if
you had cycled power. The reset process will take several seconds.