Harman Martin ERA 150 Wash User Manual Download Page 34 | Manualshive

Page: 34 / 52

background image

34

Martin

®

ERA 150 Wash User Guide

Installing using a Martin Companion Cable

To install the ERA 150 Wash firmware using a Martin Companion Cable:
1. Apply power to the ERA 150 Wash fixture(s) and allow it to boot
2.

Connect the Martin Companion Cable’s USB connector to a USB port on
your PC. Connect the Martin Companion Cable’s XLR connector to
either the fixture’s DMX IN connector or the DMX link.

3. Start the PC and launch Martin Companion. Check that the Martin

Companion application correctly detects the Martin Companion Cable (a
green dot should appear next to

USB Connected

in the top right-hand

corner of the window).

4. Locate the latest ERA 150 Wash firmware in Martin Companion

(

Firmware

→

ERA

→

ERA 150 Wash

).

5. Start the firmware update by clicking

Update Firmware

in Martin

Companion. Do not disconnect the Martin Companion Cable or power
off the fixture(s) until the upload is complete and the fixture(s) has
successfully rebooted.

6. If you are updating multiple fixtures over a DMX link, check that they

have all rebooted correctly.

Installing using a USB memory device

To install the ERA 150 Wash firmware using a USB flash memory drive:
1. Launch the Martin Companion software suite on a PC that is connected

to the Internet. Martin Companion will automatically download the latest
Martin firmware files from the Martin cloud.

2.

In Martin Companion’s

Fixture Update

window, click on

Download USB

Stick Firmware

and navigate to the root directory of the USB drive

where you want to save the firmware.

3. Click on

Select Folder

. Martin Companion will automatically save the

firmware files in a correctly named folder to the USB drive’s root

directory.

4. When you see a

Download Successful

message, you can close Martin

Companion. Check that the USB drive now contains a folder whose
name is the fixture type and software version. Then use an

Eject

command in Windows to make sure that you can remove the drive safely,
and remove the drive from the PC.

5. Power the fixture off. Disconnect the fixture completely from the DMX

data link. Insert the USB drive into the USB host socket next to the

fixture’s control panel.

«
...
32
33
34
35
36
...
»

Summary of Contents for Martin ERA 150 Wash





















































Reviews:

No comments

Related manuals for Martin ERA 150 Wash

Brand: LANZINI Pages: 2

Crouse-Hinds FMV Series

Brand: Eaton Pages: 3

MPL1004-LED10K840

Brand: Utilitech Pages: 10

ELLIPSOIDAL DOWNLIGHT

Brand: Lightolier Pages: 3

Brand: American DJ Pages: 4

Brand: ADJ Pages: 10

Flood Light Slim Line 10

Brand: Gardens at Night Pages: 8

Brand: NightSearcher Pages: 2

Brand: ANSMANN Pages: 16

Brand: HAMPTON BAY Pages: 24

Brand: Ecco Pages: 3

Brand: XD COLLECTION Pages: 28

Brand: ADJ Pages: 14

Brand: ADJ Pages: 26

Brand: Abicor Binzel Pages: 104

Brand: Cooper Lighting Pages: 1

Brand: EuroLite Pages: 27

EPL-QC-16C-2X50LED-RT-X24V-C1D1-12.3-100-EPP

Brand: Larson Electronics Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands