Martin
®
ERA 150 Wash User Guide
21
Dimming curves
Four dimming curves are available:
•
LINEAR
–
The increase in light intensity appears to be linear as DMX
value is increased.
•
SQUARE LAW
–
light intensity control is finer at low levels and coarser
at high levels.
•
INVERSE SQUARE LAW
–
light intensity control is coarser at low levels
and finer at high levels.
•
S-CURVE
–
light intensity control is finer at low levels and high levels
and coarser at medium levels.
To set the fixture’s dimming curve:
1. Select DIMMER CURVE and press ENTER. The currently set dimming
curve mode will blink in the display.
2. Use the DOWN and UP buttons to select LINEAR, SQUARE LAW, INV
SQ LAW, or S-CURVE.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Dimming speed and smoothness
You can optimize dimming to give either the fastest or the smoothest
changes in dimming levels. To optimize dimming:
1. Select DIMMING SPEED and press ENTER.
2. Use the DOWN and UP buttons to select FAST (dimmer optimized for
speed) or SLOW (dimmer optimized for smoothness).
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Blackout or Hold if DMX signal stops
You can decide how the fixture should behave if you are controlling the
fixture via DMX and then you stop sending the DMX data signal:
1. Select NO DATA MODE and press ENTER. The currently set mode will
blink in the display.
Summary of Contents for Martin ERA 150 Wash
Page 1: ...ERA 150 Wash User Guide ...
Page 46: ...46 Martin ERA 150 Wash User Guide Dimensions All dimensions are in millimeters ...
Page 51: ......
Page 52: ...www martin com ...
