Martin
®
ERA 150 Wash User Guide
5
Install, operate and service Martin products only as directed in
their user manuals, or you may create a safety hazard or
cause damage that is not covered by product warranties.
Follow the safety precautions listed below and observe all
warnings in this manual and printed on the product. Before
you install, operate or service the fixture, check the Martin
website at www.martin.com and make sure that you have the
latest user documentation for the fixture. Document revisions
are indicated at the bottom of page 2.
Technical Support
If you have questions about how to install or operate the
fixture safely, please contact Harman Professional Technical
support:
•
For technical support in North America, please contact:
[email protected]
Phone: (844) 776-4899
•
For technical support outside North America, please
contact your national distributor.
Protection from electric shock
Do not expose the fixture to rain or moisture.
Disconnect the fixture from AC power before carrying out any
installation or maintenance work and when the fixture is not in
use.
Ensure that the fixture is electrically connected to ground
(earth).
Use only a source of AC power that complies with local
building and electrical codes and has both overload and
ground-fault (earth-fault) protection.
Socket outlets or external power switches used to supply the
fixture with power must be located near the fixture and easily
accessible so that the fixture can easily be disconnected from
power.
Isolate the fixture from power immediately if the power plug or
any seal, cover, cable, or other component is damaged,
defective, deformed, wet or showing signs of overheating. Do
not reapply power until repairs have been completed.
Summary of Contents for Martin ERA 150 Wash
Page 1: ...ERA 150 Wash User Guide ...
Page 46: ...46 Martin ERA 150 Wash User Guide Dimensions All dimensions are in millimeters ...
Page 51: ......
Page 52: ...www martin com ...
