Harman Kardon AVR 645 Owner'S Manual Download Page 13

Page: 13 / 68

MAIN REMOTE CONTROL FUNCTIONS

ENGLISH

Preset Up/Down:

When the tuner is in

use, press these buttons to scroll through the sta-
tions programmed into the AVR’s memory. When
CD or DVD is selected using the

Input Selector

button

, these buttons may function as Slow

Fwd/Rev (DVD) or ”+10” (CD, CDR).

Clear Button:

Press this button to clear

incorrect entries when using the remote to directly
enter a radio station’s frequency.

Memory Button:

Press this button to enter

a radio station into the AVR’s preset memory. Two
underline indicators will flash at the right side of
the

Main Information Display

, you then

have five seconds to enter a preset memory
location using the

Numeric Keys

. (See

page 51 for more information.)

Delay Select Button:

This button selects

adjustments to the A/V Sync Delay and the indi-
vidual channel displays. The first press of the but-
ton displays an

A/V SYNC DELAY

message

in the

Lower Display Line

and in the on-

screen display, which means that you may
change the amount of time that all channels are
delayed together behind the video. This enables
you to compensate for the loss of lip sync that
may be caused by digital video processing in your
display or by television stations. To change the
A/V Sync Delay, press the

Set Button

while

the

A/V SYNC DELAY

message is visible

and then use the

⁄

Navigation Button

to change the setting so that the sound and the
video image are in sync. To change the delay for
an individual output channel, press the

⁄

Navigation Button

until the desired chan-

nel name is shown, and then press the

Set

Button

. Use the

⁄

Navigation

Buttons

to change the delay amount. (See

page 35 for more information on delay options.)

Program Button:

This button is used to

begin the process of programming the remote.
Press and hold this button for three seconds to
place the remote in the programming mode.
Once the red LED under the

Set Button

lights, release the button. You may then select
from the desired option. (See pages 53-61 for
more information on configuring the remote.)

Speaker Select:

Press this button to begin

the process of configuring the AVR’s Bass
Management System for use with the type of
speakers used in your system. Once the button
has been pressed, use the

⁄

buttons

select the channel you wish to set up. Press the

Set Button

and then select the speaker

type (Large, Small or None) appropriate with the
speaker in use. (See page 21 for more informa-
tion.)

Multi-Room:

Press this button to activate

the Multiroom system or to begin the process of
changing the input or volume level for the sec-
ond zone. (See page 49 for more information on
the Multiroom system.)

Volume Up/Down:

Press these buttons to

raise or lower the system volume.

EzSet/EQ Button:

Press this button to turn

the filters used by EzSet/EQ on or off. This allows
you to hear the difference in system performance
when EzSet/EQ is engaged or out of the signal
path.

Channel Up/Down Selector:

This button

has no function when the AVR is being con-
trolled, but when programmed for use with a
VCR, TV, cable box, satellite receiver or other sim-
ilar product it will change the channel up or
down. See pages 53-61 for more information on
programming the remote.

Mute:

Press this button to momentarily

silence the AVR or TV set being controlled,
depending on which device has been selected.
When the AVR remote is being programmed to
operate another device, this button is pressed with
the

Input Selector

button

to begin the pro-

gramming process. (See page 53 for more infor-
mation on programming the remote.)

Tone Control Button:

This button controls

the tone mode settings, enabling adjustment of
the bass and treble boost/cut. You may also use
it to take the tone controls out of the signal path
completely for “flat” response. The first press of
the button displays a

TONE I N

message in the

Lower Display Line

and in the on-screen

display. To take the controls out of the signal
path press either of the

⁄

Navigation

Buttons

until the display reads

TONE

OUT

. To change the bass or treble settings,