Introduction
Thank you for choosing the cPP2 charging pole from
eCharge Hardy Barth GmbH
! With
this charging station you invest in an innovative and future-proof solution for the public
sector to charge your electric vehicle reliably and intelligently.
The charging stations of the cPP2 series are delivered pre-configured for a minimum of
technical and temporal installation effort, with an appropriately prepared installation site.
For a particularly quick and easy installation, eCharge offers you a suitable prefabricated
foundation, which has been specially designed for the installation of the cPP2 and is
available separately. (page 16 ff)
Our charging stations are subject to permanent further development and comply with
the regulations and standards applicable throughout Europe for the charging of electric
vehicles. Please also read the section "Standards & Guidelines" on page 32.
Product description
Your cPP2 charging station allows safe and convenient charging of electric vehicles in
accordance with the IEC 61851-1 standard, Mode 3. Depending on the variant in
question, the cPP2 is always designed for the fastest possible charging of the connected
electric vehicles in terms of circuit design, cable diameter and connections.
Thanks to access control via the Charge Controller, charging operations can be managed
easily and in a controlled manner. The versatile setting parameters thus facilitate, for
example, the charging operation of several vehicles by limiting the respective charging
current.
An integrated MID energy meter provides precise information about the current
charging power at each charging point. The determined data on active and past charging
operations can then be made available in real time on a smartphone, tablet or PC in the
internal network and can be transferred as required.
In combination with a compatible inverter or additional eCB1 MP+, the cPP2 charging
station also allows 100% use of solar power from an existing photovoltaic system for
charging your electric vehicle. Furthermore, in combination with a compatible smart
energy meter, such as our eCB1 MP+, the cPP2 enables dynamic load management, for
example, to avoid peak loads or limit the maximum current when using multiple charging
points simultaneously.
Installation and operating manual
cPP2
charging pole
Version: 1.0.2
9