Instructions for use / Maintenance
Observe the following instructions for use or maintenance of your charging station:
•
This device must
ALWAYS
be connected to the protective conductor of the power
supply!
•
Ensure that the rated voltage and current of the device comply with the specifications
for your local power grid and that the rated power is not exceeded during charging
operation.
•
At all times, observe the locally applicable safety regulations for the country in which
you are operating the charging station.
•
To disconnect the charging station completely from the mains, the supply line must
always be interrupted via the upstream circuit breaker(s).
•
Never install and operate the charging station in confined spaces. In particular, it must
be ensured that vehicles can be parked at the prescribed distance from the charging
station for charging operation and can be connected to the charging cable without
tension.
•
Make sure that the front door of the charging pole is always locked to prevent
unauthorized opening of the housing. Keep the key for opening the door in a place
known only to authorized users.
•
NEVER
make any modifications to the housing or the internal circuitry of the device:
Violation is a fundamental breach of the warranty fundamentally violates the terms of
the warranty and voids the warranty with immediate effect.
•
There are no maintenance parts in the device for the user.
•
Have the device repaired and/or installed by qualified personnel only.
ATTENTION!
This cPP2 charging station is intended for connection and operation on
230V / 400V and 50 Hz mains voltage. The supply line must be fed into the
housing via a suitable cable duct or pipe on the underside.
Installation and operating manual
cPP2
charging pole
Version: 1.0.2
7