Via the two status indicators on the top of the housing and the LEDs in the central
control panel for charging registration and release, the user is informed at all times
about the current status of the charging station and the respective charging point.
Should a malfunction occur during operation or registration, the error is displayed via the
upper LEDs.
The cPP2 offers charging sockets type 2 according to IEC 62196-2 as standard.
eCharge
offers you charging cables type 2 in various designs and lengths for this purpose.
Optionally, the cPP2 is also available with an additional protective contact socket: For
more information, please contact your sales partner.
In all our products, we place maximum importance on safety for the user. Therefore, in
addition to internal line and residual current circuit breakers, the cPP2 charging station
also offers DC residual current detection, which, in combination with the installation's
protective devices, ensures careful protection against short circuits, electric shocks and
other hazards. Access to the internal switchgear is secured via the swivel handle on the
side, and can only be opened by authorized users with a key.
NOTE!
A cylinder lock is NOT pre-installed in the double cylinder swivel handle of
the charging pole ex works. A corresponding 40 or 45 profile half cylinder
must be purchased from a specialist retailer or via
eCharge
and installed in
the swivel handle according to the specifications of the respective
manufacturer. It is strongly recommended to
NEVER
operate the cPP2 in public areas
WITHOUT
a
CYLINDER LOCK
installed.
The sturdy housing of the cPP2 is prepared for IP44 protection and can be installed in a
suitable outdoor installation position using a concrete foundation manufactured by the
operator or optionally available from
eCharge
. Information on our accessories can be
found on page 12.
Installation and operating manual
cPP2
charging pole
Version: 1.0.2
10