Commissioning and charging
Safety instructions for operation
Before carrying out a charge with the cPP2, you must observe the following safety
instructions:
•
Make sure that the cPP2 has been installed according to the specifications in
this document: In particular, ensure that the charging station is freely
accessible, not exposed to direct sunlight or rain if possible, and that an electric
vehicle can be connected without the charging cable being under tension or
otherwise stressed.
•
Make sure that the cPP2 is properly connected to the supply line.
•
Make sure that the supply line is protected by suitable circuit breakers.
•
Make sure that the lid of the cPP2 is always closed during normal operation.
•
Make sure that the charging cable is not twisted and check that there is no
visible damage to the cable, charging couplings, housing and charging sockets.
For charging, your cPP2 has different connection options from the TYPE 2 plug
depending on the variant. Accordingly, you need an optionally available charging cable
to connect to your vehicle.
The type 2 charging socket of the cPP2 in accordance with
IEC 62196-2 has three live contacts, a neutral conductor, a
PE protective conductor and two signal contacts (
C
ontrol
P
ilot and
P
roximity
P
ilot), which ensure safe connection
and thus hazard-free use.
As long as the plug of the external charging cable is not
locked in the charging socket of the cPP2, no voltage is
output to the charging cable via the current-carrying
contacts of the socket. If the mains voltage fails, the
charging socket is automatically unlocked.
The charging socket of the cPP2 offers an electromotive module with an intern RFID-
Module (available as an option) for a fully controlled charging process.
Installation and operating manual
cPP2
charging pole
Version: 1.0.2
24
Figure 2: Type 2 plug female