Hardy Barth cPP2, Installation And Operating Manual, Page: 32 / 35

Standards & Guidelines
The cPP2 charging station complies with the following standards and protection classes:
General standards
Norm Explanation
2014/30/EU EMC Directive
2011/65/EU RoHS Directive
2012/19/EU WEEE Directive
ElektroG Electrical and Electronics Act
Standards, protection class and degree of protection for device safety
DIN EN IEC 61851 describes conductive charging systems for electric vehicles:
Norm Explanation
IEC 61851-1 - General requirements
- Protection against electric shock
- miscellaneous: Environmental conditions
IEC 61851-1, Mode 3 - Charging with specific charging plug-in systems for
electric vehicles with pilot and control contact
IEC 61851-21-2 - Requirements for on-board chargers for electric
vehicles with alternating current / direct current
supply
DIN EN 61851-22 - AC charging station for electric vehicles
Protection class/
protection type
Explanation
Protection class I: All electrically conductive parts of the
equipment are connected with low resistance to the
protective conductor system of the fixed installation.
IP 44
Protection class of the enclosure:
•
protected against access with a wire and protected against
foreign objects > Ø1.0 mm
•
Protection against splashing water on all sides
Installation and operating manual cPP2 charging pole
Version: 1.0.2
32