manualshive.com logo in svg

Hardi SARITOR 4000, Operator'S Manual

Share
Download
Hardi SARITOR 4000 Operator'S Manual Download Page 56

5 - Operation

54

Parking the sprayer 

To avoid spot contamination, the sprayer should always be parked at either the washing/filling location or under a roof to 
avoid rainfall washing chemical residues from the sprayer’s surfaces.

•

Parking at the washing/filling location will retain residues.

•

Always park the machine out of reach of children, animals or unauthorized persons.

Safety precautions - crop protection chemicals

±

WARNING! Always be careful when working with crop protection chemicals!

±

WARNING! Always wear correct protective clothing before handling chemicals!

Personal protection

Depending on chemical type, protective gear/equipment should be worn to avoid contact with the chemicals, e.g.:

•

Gloves

•

Waterproof boots

•

Headgear

•

Respirator

•

Safety goggles

•

Chemical resistant overalls

±

WARNING! Protective clothing/equipment should be used when preparing the spray liquid, during the spray job and 
when cleaning the sprayer. Follow the chemical manufacturer’s instructions given on the chemical label.

±

WARNING! It is always advisable to have clean water available, especially when filling the sprayer with chemicals.

±

WARNING! Always clean the sprayer carefully and immediately after use.

±

WARNING! Only mix chemicals in the tank according to directions given by the chemical manufacturer.

±

WARNING! Always clean the sprayer before changing to another chemical.

Chemical Filling

Chemical filling can be done via the TurboFiller.

˜

ATTENTION! The scale in the hopper is only to be used as a reference! It is recommended to use a measuring jug for 
best accuracy.

˜

ATTENTION! The Chemical Container Cleaning device uses spray liquid to rinse concentrated chemicals from 
containers. Always rinse the chemical containers with clean water several times until they are clean before disposal.

˜

ATTENTION! The hopper rinsing device uses spray liquid to rinse concentrated chemicals from the hopper! The FILLER 
must always be cleaned together with the rest of the sprayer when the spray job is done.

Summary of Contents for SARITOR 4000































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands