Hardi SARITOR 4000, Operator'S Manual

Page: 35 / 94

4 - Sprayer setup
33
Oil Level in the wheel gear boxes
±
WARNING! Before driving, check the oil level in the wheel
gearboxes:
• Move the self-propelled to orient the wheel gearboxes as shown in
the illustration.
• Unscrew the oil fill level plug (1).
• Add oil if necessary, through port (2).
• Fill until oil flows through the level port (1).
÷
Note: Only use recommended transmission oil. See “Table of
recommended lubricants” on page 63.
Air Suspension
The height of the suspension air bags (distance d), when service
pressure is reached, should be approximately:
Front = 9.5 in. (240 mm)
Rear = 7.5 in. (190 mm).
See “Air suspension adjustment” on page 71 for further details.
Selection of temperature unit
A wire marked X313 is located at the right hand side of the cab. The
default temperature unit is set by this wire being grounded or not.
• Open the cab roof.
• Select the temperature unit, Celsius or Fahrenheit:
Celsius (°C) = Wire (1) is connected to the ground nut (2).
Fahrenheit (°F) = Disconnect and isolate wire (1).
÷
Note: Set to Fahrenheit at Factory.
2
1
LEVEL
OIL FILL
OIL DRAIN
TOP
d d
X313
1
2
X313