Hardi SARITOR 4000, Operator'S Manual

Page: 38 / 94

5 - Operation
36
Starting the engine
Place the Grip handle in neutral to start the engine.
Turn the ignition key to position [1] to initialize the Plus+One system.
If the engine is cold, the engine preheat symbol will appear in the
display. Leave the ignition key in position (1) until the symbol disappears
before proceeding.
Turn the ignition key to position (2) to start the engine. Release it after
start-up and the key will automatically return to position [1].
÷
Note: The symbol only appears if the engine preheat is required
to start.
±
WARNING! After starting the engine, if the engine fault indicator (4) lights up and one of the 3 priority messages
appears on the screen, you must stop the engine immediately to prevent damage to the engine.
1. Engine oil pressure is too low.
2. Engine overheating.
3. Pressure turbo-compressor too low.
÷
Note: For more information on the error messages, see
“CUMMINS engine error codes” on page 78
Air Suspension
±
WARNING! Before driving, wait until the air suspension is
operational. A pressure gauge installed on the outside of the cab
indicates the pressure in the circuit. The value must be between
130 psi (9 bar) and 145 psi (10 bar). To adjust the air pressure, see
“Compressed air pressure adjustment” on page 71
0
off
1
2
rpm x100
54.5
P
OFF
4
1
2
3
OK
OK