manualshive.com logo in svg

Hardi SARITOR 4000, Operator'S Manual

Share
Download
Hardi SARITOR 4000 Operator'S Manual Download Page 17

15

General information

General View

The SARITOR is divided into 3 zones: a Clean zone, a Working zone and a 
Spraying zone, referring to the level of possible chemical contamination. 
The functions and features are listed by zones below. Please note that 
some of the features are optional equipment.

Sprayer use

The HARDI® sprayer is for the application of crop protection chemicals and liquid fertilizers. The equipment must only be 
used for this purpose. It is not allowable to use the sprayer for other purposes. If no local law demands that the operator 
must be certified to use spray equipment, it is strongly recommended to be trained in correct plant protection and in safe 
handling of plant protection chemicals to avoid unnecessary risk for persons and the environment when doing your spray 
job.

Sprayer identification plates

Frame

Very strong and compact frame which also has a strong chemical and weather resistant electrostatic lacquer coat. The 
hardware is either stainless steel or treated to be resistant to corrosion. The front and rear suspension is provided by a 
pneumatic system.

Tanks

The main tank is made of impact-proof, UV-resistant and chemical resistant polyethylene. It has a purposeful design with no 
sharp corners for easy cleaning. Nominal content: 1100 gallons (4000 liters) or 1300 gallons (5000 liters). A large, easy to read 
tank level indicator is placed beside the platform and is visible from the cabin. The filling hole is placed so it can be accessed 
from the platform. The SARITOR is standard equipped with a 150 gallon (575 liter) rinse tank, and a 26 gallon (100 liter) clean 
water tank (hand washing tank).

A.

Clean Zone

Engine

Working platform with ladder

Cabin

Valve for hand washing

Access to Main tank

B.

Working Zone

Tank level indicator

Multipath Valves

FastFiller coupler

ChemFiller

C.

Spraying Zone

Boom lift, up/down

Boom

Nozzles

Mudguards

Suspension

3 - Description

Summary of Contents for SARITOR 4000































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands