8 - Menu 4, Toolbox
61
Menu 4.5 Test
How to make equipment test
All readouts for the sensors are in accumulated counts, i.e. one signal gives one count, except for optional (analog) sensors,
which are read in milliamperes (mA).
Go to menu [4.5 TEST]. Choose the item to be tested and open the menu. Activate sensor and see if the signal is detected.
Menu 4.5.1 Flow calculation. Enter this menu test flow sensor.
[4.5.1.1 Boom pressure]. Enter this menu to see flow sensor readout (bar).
Following menus:
[4.5.1.2 Reg valve calc]. Enter this menu to see regulation valve readout (bar).
[4.5.1.3 Pump calc flow]. Enter this menu to see pump flow readout (L/min).
[4.5.1.5 Reg valve calc]. Enter this menu to see regulation valve readout (L/min).
[4.5.1.6 Boom flow sensor]. Enter this menu to see flow sensor readout (L/min).
Menu 4.5.2 Speed. Enter this menu to test speed sensor.
[4.5.2 Speed]. Enter this menu to see speed readout.
Menu 4.5.3 Optional sensor. Enter this menu to test optional sensors.
[4.5.3.1 Pressure]. Enter this menu to see pressure readout (mA).
Following menus:
[4.5.3.2 Fan speed]. Enter this menu to see counts readout (counts/pulses).
[4.5.3.3 Tank gauge]. Enter this menu to see frequency readout (Hz).
[4.5.3.5 Regulation fb.]. Enter this menu to see regulation valve feedback readout (counts/pulses).
BOOM PRESSURE
XX.XX bar
4.5.1.1
SPEED
00000
4.5.2
BOOM PRESSURE
XX.XX bar
4.5.1.1
PRESSURE
Current
0.0 mA
4.5.3.1
Summary of Contents for HC 5500 SPRAY BOX III
