Hardi HC 5500 SPRAY BOX III, Instruction Book

Page: 65 / 84

65
9 - Menu 5, Logbook
Menu 5.1 Print
What you can print
The following can be printed via the 12 volt printer.
Menu 5.1.1 Register number
Enter this menu to print a specific register with spraying data. By using
the arrow keys, the register number in the top right corner can be
adjusted. When the desired register number appears, press
to print
out the data register.
Now choose a new register number to print this data out, if needed.
Menu 5.1.2 All registers
Enter this menu to print all registers 1-99 with spraying data at once.
Only active ones will be printed.
Press to print out the data.
Menu 5.1.3 Configuration
Enter this menu to print all the parameters of the controller at once.
Press to print out the data.
÷
NOTE! While the data is being printed out, the bottom line in the display reads “Printing”.
Two examples of printouts are shown here.
•
To the left is a printout of a specific register.
•
To the right is a printout of the configuration.
REGISTER NUMBER
5.1.1
PRINT
All registers
5.1.2
PRINT
Configuration
5.1.3