Hardi HC 5500 SPRAY BOX III, Instruction Book

Page: 29 / 84

29
5 - Menu 1, Daily Settings
Menu 1.1 Volume rate
How to change the volume rate
The volume rate (litres/hectare) can be changed by doing one of the following four actions.
1.
Set the desired rate in the Controller menu [1.1 VOLUME RATE].
This menu can be accessed by pressing for a few seconds.
Move with or for selecting the value digit to be changed.
Use or to change the value.
Press to save the setting.
Press and hold to exit the menu system.
2.
On the working screen: Press or to spray a percentage
over or under the preset volume rate, in steps of 10 %. The 3
rd
line
in the display indicates the current setting, when this is activated.
The limits are +/- 99 % of the preset volume rate.
In this example, the preset volume rate is 200 l/ha. While spraying,
the operator has increased it by 10 %.
3.
Manually raise or lower the pressure via the yellow switch on the
Spray Box III.
4.
When working (on working screen): Press or to change to 1 of 3 preset volume rates.
If the volume rate is set up with 3 programmable rates, there are 3 options to enter a volume rate.
Menu [1.1.1: RATE 1], default
Menu [1.1.2: RATE 2]
Menu [1.1.3: RATE 3]
μ
ATTENTION! It can be useful to change the volume rate when spraying under these conditions:
- when spraying the field boundaries or headlands.
- when spraying areas with large quantity of weeds.
- when shifting gear (useful for some tractor models).
- when nearing the end of spraying a field and the main tank must be empty when finished.
μ
ATTENTION! To return to the normal working screen, press .
1.1
VOLUME RATE
0200 L/ha
220 L/ha
P 200 +10% L/ha
Time
12:00