Hardi HC 5500 SPRAY BOX III, Instruction Book

Page: 33 / 84

33
6 - Menu 2, Setup
Menu 2.1 Display Readout
General info
When reading the following menu explanations, it is assumed that you have mastered the general keystrokes and you can
“find your way” to the specific menu. If this is not so, please read the section “Keys” again.
Example of readout
It is possible to choose freely, which function is to be shown on the 3
rd
or 4
th
line of the working screen.
Choose the submenus of menu [2.1 Display readout].
Choose a submenu e.g. the menu [2.1.5 Work rate].
Press to confirm.
Use or to choose which line is to show data. The display will
change as shown.
Press to confirm.
μ
ATTENTION! As some readouts require extra sensors, the relevant sensor has to be connected to get a readout.
Menu 2.1.1 Program : Actual
Programmed and actual application rate (litres per hectare).
Menu 2.1.2 Flow rate
Flow rate out to the spray boom (litres per minute).
2.1.5.2
WORK RATE
Show here
2.1.5.1
WORK RATE
Show above
2.1.1
DISPLAY READOUT
Program : Actual
2.1.2
DISPLAY READOUT
Flow rate