Hardi HC 5500 SPRAY BOX III, Instruction Book

Page: 27 / 84

4 - System setup
27
Daily settings
System start-up
When the HC 5500 is turned on, a boot sequence is started, while the controller is initiating itself.
If the Controller is put into operation for the very first time, it will prompt for date and time. Please see menu [2.4 Set Clock]
for details on setting of clock.
During start-up, the display lists information in the following order:
1.
A screen showing
•
the controller model is an HC 5500 and the current software
version in the 3
rd
line of the display.
•
a serial number for the controller in the 4
th
line of the display.
2.
A screen showing
•
boom length (in meters) in the 3
rd
line of the display.
•
number of spray sections programmed into the controller in the
4
th
line of the display.
μ
ATTENTION! These data should reflect the actual sprayer - if not, please contact your local HARDI dealer to correct this.
HC 5500 SW X.XX
S/N XXXXXXXX
BOOM: XX.X m
SECTIONS: X