Hardi HC 5500 SPRAY BOX III, Instruction Book

Page: 58 / 84

8 - Menu 4, Toolbox
58
Menu 4.2 Service interval
Menus and intervals
Service intervals and a nozzle check are programmed into the controller. This makes it easier for the operator to remember
the service intervals. If the intervals are to be changed, contact your HARDI service centre for more information.
From the factory, the Controller is set up with three service reminders and one nozzle check reminder.
Entering the above menu’s will display the hours remaining until next service. The importer or dealer may have added a
“Miscellaneous service” Interval. If no interval is set, “Not def.” is shown, meaning that this interval is not yet defined.
Press to register service or control, if displayed when switched on.
The warning will remain present on the display, until the service interval is reset.
Service interval reset
To reset service interval, go to relevant interval menu as described above.
Press to reset hour meter.
Press to confirm.
Menu Interval (hours) Action
[4.2.1 Check filters] 10 See sprayer instruction book, Maintenance.
[4.2.2 Grease boom] 50 See sprayer instruction book, Maintenance.
[4.2.3 Grease track and centre] 250 See sprayer instruction book, Maintenance.
[4.2.4 Miscellaneous service] - Not defined from factory.
[4.2.5 Check nozzles] 50 Check flow rate. Change nozzles if more than 10% of rated flow.