-CS -61
9-3
SEWING
9_3 D610
Moving the hoop while embroidering then returning to the correct location (Position)
If you wish to move the embroidery frame at a midpoint of the design, follow these steps.
1. Stop the sewing by pressing the "STOP"
button.
2. Press an “Arrow ” button (up, down, left,
right) to move the embroidery hoop.
3. If you press the “MENU” for few second,
you will see the direct frame movement
menu.
4. Press the “Right” arrow button.
The frame will automatically return to the correct
position before it was moved.
And you return to drive mode.
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
Org Top Cnt Pos
ID:10 Nd: 4
1230
START
STOP
+
-
1
3
4
X:-234.5
Y: 123.8
2
Moving to the beginning position (Origin)
The frame returns to the origin point (beginning position of design).
1. If you press and hold the “MENU” button for
a few seconds, you will see the direct frame
movement menu when the machine is
stopped.
2. Press the “Left” arrow button.
The frame will move to the origin point and the
data will be at the same point.
(Top) will be indicated on the panel.
You will then return to the drive mode.
If you want to get back to the previous status
from the origin point, do #1 and #2 above again.
FORWARD
P.FOOT
T.CUT
MENU
ENT.
ID: 2 Nd: 4
BIRD
1
2
P.FOOT
T.CUT
MENU
FORWARD
ENT.
Org Top Cnt Pos
G
