-CS -56
7-B
CAP FRAME (OPTION)
7_B E801
FORWARD
P.FOOT
T.CUT
MENU
ENT.
ID: 2 Nd: 4
0
Starting to sew
1. If you press and hold the menu button for a
few second, you will see the direct frame
movement menu if the machine is stopped.
2. Press the “Down” arrow button.
Embroidery frame moves to the center of embroi-
dery area automatically.
*1 Actual embroidery area will be restricted in
accordance with design and shape of a cap.
3. Press the arrow buttons (up, down, left,
right) and move the embroidering frame
position to the origin point of the pattern
(usually the center).
Once the cap drive is installed, the design
automatically rotates upside down for cap sew-
ing.
4. Press the "START" button.
The embroidering frame moves for the design
trace. 5-3
Make sure that the pressure foot or needle does
not hit the frame.
If you push and hold the start button, the ma-
chine will discontinue the trace and move to the
first stitch point.
:Original point (Start point)
Embroidery
area
FORWARD
P.FOOT
T.CUT
MENU
ENT.
ID: 2 Nd: 4
BIRD
1
2
P.FOOT
T.CUT
MENU
FORWARD
ENT.
Org Top Cnt Pos
G
180mm (Normal cap frame)
290mm (Wide cap frame)
START
STOP
+
-
3
4
You can confirm the outline
and position of design.
Embroidery area (Max. *1)
67mm
There is a case that the upper part of the cap cannot
be embroidered satisfactory depending on shape of a
cap.
We recommend to change design position or reducing
size of the design.
Refer to the instruction book of "Happy link" to reduce
the size of the design.
Embroidery
area
