-CS -65
8-3
8_3 I604
ADJUSTING THE LASER POINTER (OPTION)
6. Remove the cap over the small hole in the
rear of the machine. Using a 3 mm hexago-
nal wrench, Please turn the main shaft and
adjust it to the “C” point.
Down the needle and making needle point mark.
7. Little loose the "Fixing screw for X" and
move the screw head up and down for
adjust red laser mark point to needle point
mark.
8. Little loose the "Fixing screw for Y" and
move the screw head up and down for
adjust red laser mark point to needle point
mark.
9. Fix the fixing screw for X and the fixing
screw for Y.
10.Check the hole position on paper and the
point of laser beam, and take paper out.
11.Press
P.FOOT
for up the Pressure foot.
Fixing screw for Y
Y direction
Hole on paper
X direction
Source of laser
Fixing screw for X
Laser beam
C
