-CS -35
5-10
PREPARATION OF PATTERN DATA
How to select monogram letters
Selecting letters using the built-in fonts.
5_10 D610
P.FOOT
T.CUT
MENU
FORWARD
ENT.
FORWARD
P.FOOT
T.CUT
MENU
ENT.
-
+
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
P.FOOT
T.CUT
MENU
FORWARD
ENT.
[MENU] Pattern
Needle
1
[MENU] Create
Letter
2
ABCDEF A
6
7
[LETTER] Char
Area
3
[LETTER] Char
Area
4
5
8
ABCDEF F
+
-
ABCDEF
GHIJKL
MNOPQRS
TUVWXYZ
abcdef
ghijkl
mnopqrs
tuvwxyz
0123456789
-,.’/?!
&<>()_
1. Press the "MENU" button until [MENU] is
showing when the machine is stopped.
2. Press the “Up” or “Down” arrow button until
the cursor points to "Letter".
3. Press the "ENT." button when showing
[LETTER].
Letter selection (Char)
To select letters. (15 letters maximum)
4. Press the “Up” or “Down” arrow button until
the cursor points to "Char".
5. Press the "ENT." button.
The cursor will move to the left side of the
display.
6. Press the “Left” or Right" arrow button to
select the position of the letter.
7. Press the "ENT." button.
The capital letters “ABCDEF” will be shown.
8. The cursor can move left or right and the
selected letter will be indicated on the right
side of the display.
You can change to the next group of letters
by pressing the “Up” or “Down arrow" but-
ton.
Pressing the "+" button will change as the
letters from capital to small letters to num-
bers to symbols.
Pressing the "-" button reverses the selec-
tions.
If you press the ”MENU” or ”STOP” button, you
will return to item 6 above.