-CS -53
7-8
CAP FRAME (OPTION)
7_8 E201
Adjusting screw
Cap grip
Hook
Hook
Cap drive frame
High Low
Cap stretcher
Guide
Screw
Loosen
(Thick fabric)
Tighten
(Thin fabric)
Wide cap frame
Adjustment
When you fix cap to cap hold frame, please
adjust in the following manner.
Make sure to do the adjustment of the cap
hold frame. If it is not adjusted properly, it
may cause the deformity, damage of the
cap, damage of the cap hold frame and
break of the cap grip.
After adjusting the cap hold frame, make
sure the cap to be set properly.
1. Adjust the length of the cap grip to suit
the thickness of the fabric. At this mo-
ment, hook should open and close
without feeling heavy.
(For the adjustment follow the next page
"Hooping caps" item 1 to 5.)
The adjustment to be done by three
adjusting screws. (Fig. 1)
If the cap grip is loose, even after
hooked the cap is not fixed tightly and
the cap is moving. (Fig. 2)
If the cap grip is too tight, you feel
heavy when it is hooked and the grip
bites into the cap too much. (Fig. 3)
If you feel hook extremely heavy in opening
and closing, there is a case that cap hold
frame will lose its shape or damage.
2. Adjust the guide position to suit the
height of the cap.
Remove screws at left and right to
adjust. (Fig. 4)
Fig. 4
Fig. 2
Fig. 3
Fig. 1
