-CS -32
5-5
PREPARATION OF PATTERN DATA
Read embroidery pattern data from memory media
Read the pattern to be embroidered from the memory media.
5_5 H701
These types of memory media can be used. This machine is able to read different kinds of
memory cards, which are generally used for digital cameras.
•Compact flash card
•Smart media card
•Memory stick
•SD card
•USB memory
Capacity of memory media has to be over 16MB. This machine doesn’t correspond if the
capacity of memory media card is under 8MB.
If you initialize the memory media with your PC, please proceed with FAT format form.
Proceed with FAT 32 format in case of memory media is over 1GB.
This machine doesn’t correspond if the memory media is initialized by electrical appliances
(Ex. digital camera) exclude PC.
Note for using Memory Card.
It is possible to use only memory cards (compact flash card, smart media card, memory stick,
SD card) which are inserted into a PCMCIA card adaptor.
If you insert a LAN card or PCMCIA card other than noted above, it is possible the machine
will break down.
Handling note of Memory Cards and USB memory.
Do not bend, drop, disassemble, charge or heat the memory card and USB memory.
Keep away from humidity or direct sunlight.
To insert a memory card
1. Insert the memory card that contains the
design data into its PCMCIA card adaptor.
(You must provide the PCMCIA card adap-
tor for your particular memory card).
2. Insert the PCMCIA card adapter all the way
into the Memory card slot of the machine
(right side of controller).
(The memory card should face toward you.)
The Eject button will come out.
3. Read embroidery design data according to
following “Memory card reading” in the next
section.
To remove a memory card
1. Please check that the “Do Not Remove”
icon is not shown. Then push the eject
button.
Pull memory card and adapter all the way out.
2. Please handle memory card carefully.
Do Not Remove
memory media
Eject Button
FORWARD
MENU
