Happy HCS, Instruction Book

Page: 44 / 94

-CS -36
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU FORWARD
ENT.
5-11
PREPARATION OF PATTERN DATA
5_11 D610
F
9
FLOWER
[LETTER] Char
Area
[LETTER] Char
Area
[LETTER] Char
Area
10
FLOWER
Area: 0
FLOWER
Area: 80
11
12
13
14
15
FLOWER
Area
9. Press the "ENT." Button to select the indi-
cated letter, number or symbol.
The cursor will move to the upper line.
10.Repeat the procedure 6. thorough 9 above.
to select additional letters.
If you wish to insert a Space it will not be recog-
nized as a letter.
11.Press the "MENU" button when you are
finished with the letter selection.
The display will show [LETTER].
Line Length (Area)
Enables you to change the line length.
Area : 0 to 290 mm (the maximum hoop size)
12.Select "Area" by use of the “up and down"
arrow button.
13.Press the "ENT." button.
14.The size will increase by pressing the “Up”
arrow button.
The size will decrease by pressing the
“Down” arrow button.
Holding down the button for more than 10 num-
bers will start.
Them increasing (or decreasing) by 10 numbers
at a time.
15.Press the "ENT." button.
Back to procedure 12.