![background image](http://html1.mh-extra.com/html/happ/27/27_installation-and-operation-manual_3753538007.webp)
Four post workshop lift HAPP27
Version 5
WWW.HAPP.COM.AU
6
Introduction
Thoroughly read this manual before installing or operating the lift and comply with the
instructions. Always display the manual in a conspicuous location.
Personal injury and property damage incurred due to non-compliance with this safety instruction
are not covered by the product liability regulation. This document shall not relieve the
owner/operator of its legal responsibilities or obligation in accordance to the Workplace Health
and Safety Act 2011.
Intended Use
The lift is designed for the safe lifting of automotive vehicles.
Observe the rated load capacity and load distribution of the lift.
Load Capacity
Load distribution front: Rear
Minimum
Maximum
HAPP 27
5000kg
1:2
2:1
In principle, the lift is designed for one approach directions.
Safety Instructions for Commissioning
The lift should be installed and commissioned by authorized service personnel only.
The standard lift version may not be installed and commissioned
in the vicinity of explosives or flammable liquids, outdoors or in moist rooms(e.g car wash).
Safety Instruction for Operation
Read the operating instructions in this document before use. Lift operation by the authorized