![background image](http://html1.mh-extra.com/html/happ/27/27_installation-and-operation-manual_3753538006.webp)
Four post workshop lift HAPP27
Version 5
WWW.HAPP.COM.AU
5
Final notes on HAPP 27-----READ ME FIRST-----
Electrical wiring
Follow electrical wiring notes in this manual
Oil grade
The hoist will need 10-15 litres of ISO grade 46 oil, this is available from most Automotive shop.
Anchor bolts
Use a high quality masonry bit ( the quad tip style not the flat blade style) that matches the size in
the kit. Check this before purchasing your bit and do a test hole to confirm it is a neat fit.
Bunnings sell good drills and bits at the price of hiring similar.
Limit switch wiring
The pump assembly can be used with a limit switch as an option, it has a connector for this
similar to the one shown below. The electrical wiring notes tell you to disable this by connecting
(bridging) these two wires. The pump will not run unless these wires are joined. If you want to
add a connector later that is removable the following connector is available from HAPP.
.
Connector available from HAPP
Safety first - ALWAYS
You are responsible for installation, maintenance and safe operation of the hoist and any
workplace health and safety obligations. Make sure you follow all safety tips in this manual and
from referenced sources with particular focus on:
•
Keep clear of the hoist and vehicle when raising and lowering.
•
Hydraulics are for lifting / lowering only, never work on a raised vehicle unless all safety
latches are engaged
•
Ensure you have a regular maintenance program in place.
•
Ensure you check and maintain all lift components and understand operating procedures
before operation.
•
Ensure operators read this manual before operation and review it on a regular basis.