Four post workshop lift HAPP27
Version 5
WWW.HAPP.COM.AU
34
Operation
•
Lift operation by authorized personnel over 18 years only.
•
Apply the parking brake after positioning the vehicle on the lift.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Closely watch the vehicle and the lift during raising and lowering cycles.
•
Observe the rated load capacity and load distribution.
•
Do not allow anyone to climb on lift or stay inside vehicle.
•
After raising the vehicle briefly, stop and check adapter for secure contact
•
Make sure the vehicle doors are closed during raising and lowering cycles.
•
Remove obstacle around before working.
•
Weight of lifted car should not be over the lifting capability.
•
Before lifting, please set well ascending or descending. Stop the machine if any abnormity,
check and exclude failure.
•
When equipment is not under work or at night, descent it to the lowest position, and drive
the car away, then turn off power supply.
Hoist Operating Procedures
This product is designed to raise vehicles only for the purpose of examination, repairs and
maintenance.
Pre operation checks:
Operator:
Ensure you have read and understood all manuals and safety procedures.
Ensure any maintenance and repairs have been completed and signed off.
Equipment:
Check:
•
All fittings for tightness
•
Anchor bolts are tight
•
Foundations are visibly sound
•
Safety release mechanisms are functional
•
Cables are sound, tensioned and not frayed, rusted
•
Electrical cords are sound
•
Pads are not damaged
•
Arm locks are functional
•
For visible structural defects
Operation:
Ensure all vehicles are loaded with lift fully down. Carefully align pads with correct mounting
locations on vehicle.
Continually check for balance and rigidity of vehicle on hoist before lifting to operating height.
Raise:
