RevV4 Valves & Systems Service Manual
28
Hankscraft Runxin, LLC 300 Wengel Drive 608.524.9465 hrh2o.com [email protected]
Function:
When the RevV4 is in Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse the
solenoid valve is open. When the RevV4 is switching the solenoid valve is closed and no water flows through
the RevV4. Also prevents water hammering in high psi applications.
If employing a series of RevV4 valves with a solenoid Figure 8-3 depicts the wiring connections.
Figure 8-3 Wiring of Solenoid Valve on Inlet
Liquid Level Controller with Inlet Pump (two-phase motor) (set b-01)
Function:
For a well system and holding tank, the RevV4 can act as a relay for the booster pump.
Refer to Figure 8-4 for wiring.
Figure 3-4 Wiring of Liquid Level Controller on the Inlet
Figure 8-4
