RevV4 Valves & Systems Service Manual
42
Hankscraft Runxin, LLC 300 Wengel Drive 608.524.9465 hrh2o.com [email protected]
Brine Draw Position
Raw water enters into control valve from
water inlet A, through valve core into injector
inlet F, into the injector outlet E. This
produces negative pressure so the brine is
drawn into the valve. Water flow then goes
into the riser pipe, through the bottom
strainer into the tank, up through resin layer,
valve core, and then flows out drain outlet C.
Slow Rinse Position
After absorbing all salt, raw water enters into
control valve through water inlet A, through
valve core into the injector nozzle, passes
through the injector nozzle down to riser
pipe, through bottom strainer, into the valve
body, up through resin layer, into valve body,
valve core, and flows out of drain outlet C.
