37
Required Parts
• Fuselage assembly
• Landing gear
• Axle w/nut (2)
• Landing gear fairing
• 2
1
/
2
-inch (63mm) wheel (2) • 1-inch (25mm) wheel
• Wheel pant (right and left) • #4 washer (2)
• 1/16-inch wheel collar (2)
• 5/32-inch wheel collar (4)
• 3mm x 4mm machine screw (4)
• 8-32 x 3/4-inch machine screw (2)
• 4-40 x 3/8-inch socket head machine screw (2)
Required Tools and Adhesives
• Threadlock
• File
• Adjustable wrench (2)
• Medium CA
• Hex wrench (included)
Step 1
Use two adjustable wrenches to attach the axles to the
landing gear.
Step 2
Attach the landing gear to the fuselage using two
8-32 x 3/4-inch machine screws and two #8 washers.
Make sure to use threadlock on the screws to prevent
them from vibrating loose.
Step 3
Use medium CA to glue the landing gear fairing to the
landing gear as shown. This will allow you to remove the
gear without destroying the fairing in the process.
Section 9: Landing Gear Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
