26
Step 5
Attach the X-mount to the motor using the screws
provided with the motor. Make sure to use threadlock on
the four screws to prevent them from vibrating loose.
Step 6
Attach the motor to the firewall using four aluminum
standoffs and four 8-32 x 2
1
/
4
-inch machine screws.
Make sure to use threadlock on all the screws to prevent
them from vibrating loose.
Step 7
Secure the speed controller to the bottom of the fuselage
using a tie wrap as shown. Secure the wires between the
motor and speed control so they do not interfere with the
operation of the motor.
Step 8
Secure the motor battery inside the fuselage using the
two hook and loop straps. If the battery moves fore or aft,
use hook and loop (not provided) mounted directly to the
battery and the tank floor to keep the battery secure inside
the fuselage.
Section 6: Electric Motor Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
