9
o
Step 4
Use a drill and 5/64-inch (2mm) drill bit to drill the holes
for the servo mounting screws.
o
Step 5
Use 2–3 drops of thin CA into each hole to harden the
surrounding wood.
o
Step 6
Attach the aileron servo to the mounting blocks using the
screws provided with the servo.
o
Step 7
Attach a long servo horn to the aileron servo after
centering the servo with the radio system. Remove any
unused arms from the servo horn as shown.
Section 1: Aileron Servo Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
