27
Required Parts
• Fuselage assembly
• Wing tube
• Propeller
• Spinner
• 1/4-20 x 1
3
/
8
-inch nylon wing bolt (2)
• #4 x 1/2-inch sheet metal screw (4)
Required Tools and Adhesives
• Thin CA
• Drill
• Hex wrench: 3/32-inch
• Pin drill
• Card stock
• Low-tack tape
• Drill bit: 1/16-inch (1.5mm), 1/8-inch (3mm),
3/8-inch (9.5mm)
Step 1
Slide the wing tube into one of the wing panels.
Step 2
Slide the wing panel and wing tube into the fuselage.
Guide the servo lead from the aileron servo into the hole
behind the wing tube.
Step 3
Secure the wing to the fuselage using a
1/4-20 x 1
3
/
8
-inch nylon wing bolt.
Step 4
Slide the remaining wing panel in position and secure it
using a 1/4-20 x 1
3
/
8
-inch nylon wing bolt.
Section 7: Wing and Cowling Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
