11
o
Step 12
Slide a clevis retainer onto one of the nylon clevises.
Thread the clevis onto the 3
1
/
8
-inch (80mm) threaded
pushrod. Turn the clevis 14 turns so it is secure on the
pushrod but can still be adjusted.
o
Step 13
Attach the clevis to the aileron control horn.
o
Step 14
Use a felt-tipped pen to mark the pushrod where it crosses
the outer hole on the servo horn.
o
Step 15
Use a pair of pliers to make a 90-degree bend in the
pushrod at the mark made in the previous step.
Section 1: Aileron Servo Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
