38
Step 4
Use a file to create a flat on both axles. This gives the
screws in the wheel collars something to bite into, making
them more secure on the axles.
Step 5
Slide a 5/32-inch wheel collar onto the axle and use a
3mm x 4mm machine screw to keep it in position for the
next few steps.
Step 6
Slide the wheel onto the axle, then another 5/32-inch
wheel collar onto the axle. Use a 3mm x 4mm machine
screw to keep the wheel and collar in position.
Step 7
Secure the wheel pant to the landing gear using a
4-40 x 3/8-inch socket head machine screw and a
#4 washer. Use threadlock on the screw to prevent
vibrations from loosening the screw.
Section 9: Landing Gear Installation
Summary of Contents for Sundowner 50 ARF
Page 45: ...45 Building and Flying Notes ...
