H&S 2958, Operator'S Manual

Page: 22 / 54

2.
Cradle Tilt System:
The Processor is designed with a cradle inside the frame that tilts or rocks from side to side and
moves the bale across the flails/rotor to prevent bridging. It is a simple self-actuating system
that is adjustable for speed and stroke to accommodate any type of bale or material.
a. Speed:
The system is designed with a standard flow divider to change and set the system speed. Set at 5
for maximum speed. Move toward 0 to decrease the speed. Normally it should take 10 to 12
seconds to complete one cycle of the cradle.
b. Stroke:
Use the sliding brackets on the cradle frame to set the range of the stroke.
- 4.5 -
4.5 Controls Continued