H&S 2958, Operator'S Manual

Page: 11 / 54

- 2.4 -
2 Safety Continued
2.3 Maintenance Safety
1. Place all controls in neutral, stop the engine, set the parking brake, remove the ignition key, wait for
all moving parts to stop and disengage the PTO before servicing, adjusting, repairing or unplugging.
2. Perform a lock out tag out (LOTO) procedure if required.
3. Relieve pressure from hydraulic circuit before servicing or disconnecting from tractor.
4. Place stands or blocks under the frame before working beneath the machine or when changing tires.
5. Use only tools, jacks and hoists of sufficient capacity for the job.
6. Install and secure all guards and shields before resuming operation.
2.4 Hydraulic Safety
Follow standard Hydraulic Safety Procedures when dealing with Hydraulic Systems.
2.5 Storage Safety
1. Store unit in an area away from human activity.
2. Do not permit children to play on or around the stored Bale Processor.
2.6 Safety Signs
1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should include a safety sign.
4. Safety signs are available through your authorized H&S Dealer.