background image

 

- 1.3 - 

H&S WARRANTY 

 

H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in 

material  and  workmanship. Except as noted below, this warranty term is twelve (12) months 
on labor, and twenty-four (24) months on parts from the date of delivery of the product to the 
original purchaser by an authorized H&S dealer. Under this warranty, H&S will repair or    
replace, at its option, any covered part which is found to be defective in material or    
workmanship during the applicable warranty term. In no case will the covered repair cost 
of a part or parts exceed the replacement cost of  that  part.  Warranty  service  must  be       
performed  by H&S or a dealer authorized by H&S to sell and/or service the product  involved, 
which will use only new or remanufactured parts or components furnished by H&S. This    
warranty includes approved parts and labor to fix the product but does not include,  and  the 
purchaser is responsible for, any service call and/or transportation of the product to and 
from the dealer’s place of business, for any premium charged for overtime labor       
requested by the purchaser, and for any service work not directly related to any defect 
covered under this warranty. This warranty includes only those components of the   
product manufactured by H&S. Warranty for any component not manufactured by H&S  
including, but not limited to, engines, batteries, tires, rims, hydraulic motors, pumps, etc. 
are covered by the warranty, if any, provided separately by their respective manufacturers.

 

This warranty in all its parts, is extended solely to the original purchaser of the product, 

is  terminated  upon  any subsequent transfer or sale from or by the original purchaser and 
extends no third party benefits or rights whatsoever.

 

The warranty term for any product used in any commercial, custom, for hire or rental     

application, is limited to six (6) months from the date of delivery of the product to the     
original purchaser or the first day of service, whichever comes first, by an authorized H&S 
dealer.

 

For commercial, custom for hire, or rental application, warranty is limited to 6 months 

from the date of delivery to the original purchaser, or the first day in service, whichever is 
earlier.

 

This warranty does not include: (1) Any product that has been altered or modified in ways 

not approved by H&S; (2) Depreciation or damage caused by normal wear, use for which 
the product was not designed,  misuse,  improper  or insufficient maintenance,  improper   
operation, accident or failure to follow the product Operator’s Manual recommendations 
and  product  decal  recommendations;  (3)  Normal  maintenance  parts  and  service;        
(4) Repairs made with parts other than those available from H&S or performed by      
anyone other than H&S or a dealer authorized by H&S to sell and/or service the product 
involved.

 

To secure warranty service the purchaser must report the product defect to a dealer     

authorized by H&S to sell and/or service the product involved within the applicable warranty 
term together with evidence of the warranty start date and make  the  product  available  to  that 
dealer within a reasonable period of time.

 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE 

FACE OF THIS WARRANTY. 

H&S and the companies affiliated with it makes no warranties, 

representations, or promises, express or implied,  as  to  the performance or freedom from 
defect of its products other than those set forth above and 

NO IMPLIED WARRANTY OF 

MERCHANTABILITY, FITNESS OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. IN NO 
EVENT WILL THE DEALER, H&S OR ANY COMPANY AFFILIATED WITH H&S BE LIABLE 
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

The 

ONLY REMEDY 

the purchaser 

has in connection with the breach of performance of any warranty on H&S products are 
those set forth above.

 

The selling dealer has no authority to make any representation or promise on behalf of 

H&S, or to modify the terms or limitations of this warranty in any way. 

 
11/14/18

 

Summary of Contents for 2958























































Reviews: